The
chip tester Model CS - 10 is designed for automatic testing and sorting of chip components depending on the measuring bridge used on the
machine.Chip are tested individually in the rotary
carrier plate with a sliding contact and sorted according
to preset parameters. Chips are binned into 10 bins and 1 bin for untested plus out of range chips.
Chips are transported by the rotary test plate to the test
position where they are probed. Depending on the options
used, the machine can have up to 5 measuring probes.
The vacuum prevents chips to fall out
of the test plate until they are binned in one of 11 bins.
A special design of the sliding contact ensures a reliable contacting and
long life time.
This contact method provides accurate measurements of
different parameters including very accurate test of C
and tg D testing at 1 MHz. The automatic chips feeding is
provided by the bulk feeder.
An video display is available on the
test bridge for continuous bin counting and information of preset tolerances.
It is also possible to preset number of chips in a bin. When
this number is reached, the machine stops sorting.
Fewer moving parts of the machine ensure lower maintenance
costs, reliable operation and long life time of the
machine.
