Tape Casting Machines

" Laboratory Tape Caster CAM T-1 - designed to cast slurries in labs or small scale productions "

Laboratory tape caster is design to cast slurries in labs or small scale productions in to homogeneous tape. Tape is cast on to carrier PET film. Carrier film is unwounded from a roll with adjustable torque control, which determines carrier tape tension.

Carrier tape is guided through casting head where slurry is deposited by doctor blade method. Casting gap is easy adjustable by micrometer screws. Gape measurement is done by two measuring gauges (readout in micrometers or mills).

>> More...

Stackers

"IS-3A stacker - automatically stacks green ceramic sheets"

A  new version of automatic green sheet stacker with less than 7s cycle time specially developed for large LTCC and inductor production, can handle either tapes on carrier film (mylar) automatically from casettes or green tapes without myar from trays.

Up to 16 different patterns can be processed.
Tapes can be aligned by computer vision or by registration pins.

>> More...
 

"Automatically transferred stacks... Manual Ceramic Foil IS-3M stacker"

A sheet is put on the stack manually and the stack is automatically transferred to the press and subsequently pressed on to carrier block.

>> More...

Tape Casting Machines

"CAM-M1A... all casting parameter are set through touch screen display "

CAM-M1A casting machine represents a new step in a ceramic tape casting control. The design of the machine is based on our successful CAM-M1 model. The machine automatically controls the casting process.

All important parameters, such as blade gap, drying parameters, tape tensions, slurry level, casting speed, etc., can easily be entered via touch screen panel, or called any time from a computer memory.

>> More...

Punching Machines

"First single pin punching machine... green ceramic sheet punching machine PAM-4S "

Machine is designed to punch holes in to green ceramic tapes. Both types of sheets ether carrier film tape or freestanding tape can be used. Designed for punching small to medium production volume with high flexibility.

>> More...

" Suitable for MLCC, MLCV mass production applications...Roll to roll printer RTP-10"

RTP-10 is designed to reel to reel print electrode pattern on to ceramic foil cast on carrier film (mylar).

>> More...