High Layer Stack - Stacking Single layers
For this technology a high layer stacker is needed. Individual sheets are placed in a cavity. Once the requested number of layers is reached, the cavity is transferred to a thermal press where all layers are laminated together.
A completely new production line has developed for this technology.
 |
Automatic screen printer P-200AAM
Automatically prints individual sheets. Sheets are taken from a cassette, accurately aligned with a vision system, screen printed, placed in a drier and placed back into a cassette after drying.
|
High layer stacker ST-6AV
This unit automatically stacks single printed sheets, according to a programmed design. In the automatic version, printed sheets are taken directly from cassettes. In the manual version, the sheets are manually placed on a vision alignment table. After alignment is done the Mylar (carrier film) is removed, the sheet is then placed in a cavity and is tacked to the previous layer.
|
 |
Lamination press TPR
The cavity (from the stacker) containing the tacked sheets is transferred to the TPR lamination press, where the sheets are laminated (using heat and pressure) to form a monolithic ceramic block. Optionally, a vacuum assisted pressing process is available.
|
 |
|
