"A punching machine for green ceramic tapes": PAM-4S, First single pin punching machine
 The PAM-4S is designed to punch holes in to green ceramic tapes. Both types of sheets either carrier film tape or freestanding tape can be used.
Machine is designed for punching small to medium production volume with high flexibility.
Punching is done by single pin punching tool or grid type punching tool for higher productivity.
Up to four or up to eight different tools can be installed on the machine to punch four or eight different holes type.
The PAM-4S punching machine consists of the following main units:
X, Y punching table
Punching table is driven by high speed servo motors via high precision ball screws, with high resolution table position control. A vacuum frame holds the sheet during punching.
Individual punching units
Several different punching unit are available like: single pin round, grid type up to eight pins, single pin square or rectangle type, positioning holes punching unit. No adjustment is needed at pin replacement for these types of punching machines.
Pins are pneumatically driven.
Upper and bottom pin position is detected by sensor for reliable operation and shorter cycle time.
Sheets loading system
Three different sheet loading system are available:
-
manual individual sheet loading
-
loading and unloading from cassette
-
 To view TECHNICAL DATA please download PAM-4S pdf data sheet (click here).
To contact us regarding PAM 4-S punching machine please click here
|
